Trim Spoiler & Mirror Kit Module

Trim, Spoiler & Mirror Kit: Quick Fit Check

For holding spoilers, mirrors, petrol-caps, door handles and some bumpers etc, if fitted with male or female threads.

The spoiler kit consists of 4 stainless steal rods with 4,5,6 & 8mm male and female threads, a self-tapper for glue on spoilers, and 2 brackets for holding the rods at any angle.

Best suited for

• Painting mirrors, spoilers and exterior trim pieces off the vehicle
• Technicians struggling to safely secure lightweight plastic parts
• Workshops wanting full access to both visible and hidden surfaces

In daily use

• Holds trim parts without taping or wiring them
• Allows the part to be rotated and angled while spraying
• Prevents parts falling or being touched during painting
• Keeps small visible parts protected during curing

Overview

Exterior trim components such as mirrors and spoilers are often some of the most visible parts on a repaired vehicle. However, they are also among the most difficult parts to secure safely during painting.

Without a proper mounting point, technicians typically tape, wire or balance these parts. This restricts spray access and increases the risk of touching, dropping or damaging the freshly painted surface.

Workflow Positioning

Within the Flexible Workflow System, this kit provides dedicated mounting points for mirrors, spoilers and trim components. These parts can be processed alongside larger panels while remaining securely mounted.

Controlled Holding

The Trim, Spoiler & Mirror Kit attaches directly to Flexible stands and provides secure mounting points specifically shaped for small exterior components. The part remains stable while still allowing full access around the panel.

Because the part is mounted to the stand, it moves with the stand. The technician can rotate and position the component to maintain a correct spray angle across all surfaces.

Paint Access

Many trim components must be painted on multiple sides. Holding the part by hand or securing it to a bench forces the painter to spray at poor angles.

Mounted on the stand, the part can be repositioned instead of the painter repositioning themselves. This improves coverage and reduces handling between coats.

Typical Use

The kit is used when small exterior parts must be painted off the vehicle but still require safe mounting and controlled positioning throughout the paint process.