call OR WHATSAPP usa / UK
+1 7045936635 | +44 7501453956
FlexBench Pro
FlexBench: Quick Fit Check
Best suited for
- Shops repairing damaged panels before painting
- Technicians sanding, filling or shaping doors, bumpers and large panels
- Workshops needing stable support for preparation work
In daily use
- Panel stays stable during sanding and filler work
- Bench length adjusts to match panel size
- Reduces panel movement while repairing damage
- Creates a controlled preparation stage before moving to a paint stand
Overview
The Flexible FlexBench is an adjustable repair and sanding workstation designed for the preparation stage of collision repair. Its extending concertina design allows the bench length to be increased or reduced so the support matches the panel being repaired.
Technicians often repair panels on fixed benches, trestles or improvised supports. When the panel overhangs the support it shifts during sanding and filling, which makes accurate repair difficult and increases the risk of damage.
Workflow Positioning
Within the Flexible Workflow System, the FlexBench Pro supports the repair and preparation stages of collision repair. Panels such as doors, fenders and hoods can be repaired and sanded on a stable working surface before moving to a Flexible stand for refinishing and curing. This separation of tasks reduces unnecessary handling and allows each workstation to support a specific stage of the workflow.
Flexible Small Parts Module System
The FlexBench Pro can also be used alongside the Flexible Small Parts Module System, allowing modules such as the Flexible SnapGrip Module, Flexible Squeeze-Out Module and Flexible Trim, Spoiler & Mirror Kit Module to be mounted while panels are being repaired or prepared.
This modular capability allows technicians to stabilise both large panels and smaller components at the same workstation during the repair and preparation stages of collision repair.
Adjustable Length Support
The FlexBench expands and contracts to support panels of different sizes. Smaller parts can be held securely while large panels such as doors, tailgates and bumpers can be supported across their length.
Because the support matches the panel, the technician can work on the repair instead of stabilising the part.
Optional Panel Support Arms
Optional support arms allow panels to be mounted rather than simply resting on the bench surface. This is especially useful when sanding edges or shaping filler areas.
The panel remains secure and does not shift while pressure is applied during sanding or repair.
Repair Accuracy
Filler shaping and sanding require a stable panel. If the panel flexes, the repaired surface becomes uneven and may require rework.
The FlexBench supports the panel evenly so it does not rock or move, allowing accurate sanding and shaping before painting.
Workflow Position
The FlexBench is intended for the repair and preparation stage only. Panels are repaired and sanded on the bench and then transferred to a Flexible stand for painting and curing.
This separation keeps paint stands clean and allows each workstation to perform a specific role in the repair process.
Ergonomics
Holding or stabilising a panel while repairing it forces awkward body positioning. A supported panel allows the technician to work in a more natural posture and reduces fatigue.
Construction
The FlexBench is Danish-engineered for daily collision repair use. The expanding structure is designed to handle repeated adjustment and panel handling during preparation work.
Typical Use
The FlexBench suits workshops that want a dedicated preparation workstation for sanding and repair before moving panels to paint equipment.
It provides a stable platform for repairing panels accurately before they progress to the paint stage.
N-table
N-Table: Quick Fit Check
A durable and versatile sanding table. with 4 independent adjustable arms to cater for a large range of panels, bumpers and small parts. It's unique design it is especially good for securing bumpers as well as doors and hoods.Best suited for
- Shops repairing damaged panels before paint
- Technicians doing filler work, straightening or plastic repair
- Workshops needing a stable working platform rather than a painting stand
In daily use
- Holds panels securely during sanding and repair
- Allows pressure work without the panel moving
- Gives full access to edges and damaged areas
- Reduces the need to work on the floor or improvised benches
Overview
The Flexible N-Table is a dedicated repair and preparation work table designed to support panels during sanding, filling and structural repair before the paint process begins.
Many workshops attempt repair work using panel stands or improvised benches. These supports are designed to hold panels lightly for painting, not to withstand pressure from sanding, pushing or shaping. As a result the panel moves, the repair becomes inconsistent and technicians often work in uncomfortable positions.
The N-Table provides a stable platform specifically intended for repair operations rather than painting.
Stable Repair Platform
The table supports panels across a broad contact area, allowing technicians to apply pressure during sanding, filler shaping and plastic repair without the part shifting or vibrating.
This stability improves repair accuracy and helps maintain correct panel shape before the painting stage.
Access to Damaged Areas
Because the panel is supported rather than suspended, the technician can reach edges, corners and damaged sections easily. The panel can be positioned securely while still leaving working access where repair is needed.
This is especially useful when repairing dents, sanding filler or correcting previous damage where controlled pressure is required.
Workshop Ergonomics
Without a proper repair table, technicians often work on the floor or on unsuitable benches. This leads to bending, kneeling and unstable working positions.
The N-Table allows repairs to be performed at a practical working height, improving control and reducing physical strain during longer repair tasks.
Workflow Role
The N-Table is not intended for spraying or curing. Instead it serves as the preparation and repair stage before panels move to a painting stand such as the EasyFlex or SingleFlex.
By separating repair work from painting supports, the workflow becomes more controlled and panels are less likely to be damaged before entering the booth.
Construction
The N-Table is Danish-engineered and manufactured from durable materials designed for daily collision repair use. It is built to withstand repeated sanding pressure and repair work that would quickly wear lighter supports.
Typical Use
The N-Table suits workshops that regularly repair damaged panels and need a stable platform for preparation work before painting.
It is intended to create a proper repair stage in the workflow so panels can be corrected accurately before moving to the paint process.
◦ Danish Engineered ◦ Vertically (up/down) ◦ Word Shelf (bottom) ◦ 4 Independent adjustable arms ◦ Industrial Rubber Wheels ◦ Electrogalvanized Nickel Plated Stainless Steel Construction Parts Processed: Most panels, Most bumpers, Small parts (using the separate small parts attachments)
Sanding Table
Sanding Table: Quick Fit Check
Best suited for
- Workshops repairing panels before painting
- Technicians tired of sanding panels on trestles, benches or improvised supports
- Shops wanting a stable platform before moving panels onto stands
In daily use
- Holds panels securely during sanding and filling
- Reduces panel movement and vibration during prep work
- Allows comfortable working height and body position
- Prepares panels safely before transferring to a paint stand
Overview
The Flexible Sanding Table is a dedicated preparation workstation designed for the repair and sanding stage before painting. It provides a stable support surface so panels can be filled, blocked and prepared correctly before being mounted onto a paint stand.
Many workshops sand panels on improvised benches, saw horses or unstable supports. This causes panels to move during sanding, leads to uneven filler work and increases the risk of scratches or accidental damage. The sanding table is designed to give controlled support during the repair stage so the surface can be prepared properly.
Workflow Positioning
Within the Flexible Workflow System, the sanding table supports the preparation stage of collision repair. Panels can be sanded and prepared on a stable work surface before moving to stands for painting.
Flexible Small Parts Module System
The Sanding Table can also be used alongside the Flexible Small Parts Module System. Modules such as the Flexible SnapGrip Module and Flexible Squeeze-Out Module allow smaller components to be mounted while panels are being prepared.
This modular capability allows technicians to prepare both large panels and smaller parts within the same workstation.
Stable Panel Support
During sanding and filling, panels are subjected to pressure and vibration. If the panel shifts while being worked, filler work becomes uneven and sanding marks become inconsistent.
The sanding table supports the panel across a broad area, preventing movement while the technician blocks or sands. This allows more accurate surface preparation and reduces the need for rework later in the process.
Preparation Before Painting
The table is intended to be the stage before the paint stand. Repairs, filler shaping and surface preparation are completed on the table, after which the panel can be transferred directly to a Flexible stand for priming and painting.
This separates the repair stage from the painting stage, keeping paint stands cleaner and allowing each workstation to be used for its proper task.
Ergonomics and Working Position
Sanding and filling require sustained pressure and repetitive motion. Working on low benches or unstable supports forces poor posture and increases fatigue.
The sanding table places the panel at a practical working height, allowing the technician to work with controlled body positioning and reducing strain during long preparation work.
Workflow Efficiency
By giving a dedicated repair workstation, the sanding table prevents paint stands from being used for heavy prep work. This keeps paint equipment cleaner and allows panels to move through a logical workflow: repair, prep, paint and curing.
The result is a more organised workshop and fewer interruptions during the painting process.
Construction
The sanding table is Danish-engineered and manufactured from durable steel designed for daily professional collision repair use. It is built to withstand repeated sanding pressure and frequent panel handling.
Typical Use
The sanding table suits workshops that want to prepare panels correctly before painting and avoid using painting equipment for heavy sanding operations.
It functions as the preparation stage of the workflow, allowing panels to be repaired and shaped properly before being mounted onto a paint stand for finishing.