call OR WHATSAPP usa / UK
+1 7045936635 | +44 7501453956
- Paint more small parts per booth cycle without cluttering the floor space.
- Hold parts safely so they don’t get lost, dropped, or damaged between prep and paint.
- Better spray angles: remove individual holders and paint parts in-hand at any angle for a cleaner finish.
The FlexTree Pro stand is a compact, small-parts workstation that keeps mirrors, trims, caps, handles and similar pieces organised and protected while you process panels. Instead of taping parts to benches or hanging them on wire at one fixed angle, you can lift each holder off the tree, spray at the best angle, then place it back securely.
€285.00
FlexTree Pro Small Parts Stand
- Paint more small parts per booth cycle without cluttering the floor space.
- Hold parts safely so they don’t get lost, dropped, or damaged between prep and paint.
- Better spray angles: remove individual holders and paint parts in-hand at any angle for a cleaner finish.
The FlexTree Pro stand is a compact, small-parts workstation that keeps mirrors, trims, caps, handles and similar pieces organised and protected while you process panels.
Instead of taping parts to benches or hanging them on wire at one fixed angle, you can lift each holder off the tree, spray at the best angle, then place it back securely.
Trim Spoiler & Mirror Kit Module
Trim, Spoiler & Mirror Kit: Quick Fit Check
For holding spoilers, mirrors, petrol-caps, door handles and some bumpers etc, if fitted with male or female threads. The spoiler kit consists of 4 stainless steal rods with 4,5,6 & 8mm male and female threads, a self-tapper for glue on spoilers, and 2 brackets for holding the rods at any angle.Best suited for
- Painting mirrors, spoilers and exterior trim pieces off the vehicle
- Technicians struggling to safely secure lightweight plastic parts
- Workshops wanting full access to both visible and hidden surfaces
In daily use
- Holds trim parts without taping or wiring them
- Allows the part to be rotated and angled while spraying
- Prevents parts falling or being touched during painting
- Keeps small visible parts protected during curing
Overview
Exterior trim components such as mirrors and spoilers are often some of the most visible parts on a repaired vehicle. However, they are also among the most difficult parts to secure safely during painting.
Without a proper mounting point, technicians typically tape, wire or balance these parts. This restricts spray access and increases the risk of touching, dropping or damaging the freshly painted surface.
Workflow Positioning
Within the Flexible Workflow System, this kit provides dedicated mounting points for mirrors, spoilers and trim components. These parts can be processed alongside larger panels while remaining securely mounted.
Controlled Holding
The Trim, Spoiler & Mirror Kit attaches directly to Flexible stands and provides secure mounting points specifically shaped for small exterior components. The part remains stable while still allowing full access around the panel.
Because the part is mounted to the stand, it moves with the stand. The technician can rotate and position the component to maintain a correct spray angle across all surfaces.
Paint Access
Many trim components must be painted on multiple sides. Holding the part by hand or securing it to a bench forces the painter to spray at poor angles.
Mounted on the stand, the part can be repositioned instead of the painter repositioning themselves. This improves coverage and reduces handling between coats.
Typical Use
The kit is used when small exterior parts must be painted off the vehicle but still require safe mounting and controlled positioning throughout the paint process.
Motorcycle Kit Module
Motorcycle Kit: Quick Fit Check
Best suited for
- Painting motorcycle tanks, fenders and similar shaped parts
- Holding curved or irregular components securely
- Workshops repairing motorcycles or specialty vehicles
In daily use
- Secures curved panels without balancing them
- Allows full spray access around the part
- Rotates the component during painting
- Reduces risk of touching fresh paint
Overview
Motorcycle components differ significantly from automotive panels. Tanks and fenders are curved, narrow and difficult to support using standard panel stands.
When unsupported, they are often held by hand, hung on wire or balanced on benches. This restricts access and creates high risk of handling damage.
Workflow Positioning
Within the Flexible Workflow System, the motorcycle kit allows stands to support motorcycle components such as tanks, fenders and wheels. This extends the same workflow principles used for automotive panels to motorcycle refinishing work.
Secure Positioning
The Motorcycle Kit attaches to Flexible stands and provides mounting points suited to narrow and curved components. The part remains stable while still allowing rotation and repositioning.
The technician can move the part instead of moving around it, allowing proper paint angle across the entire surface.
Typical Use
The kit is used whenever motorcycle parts or similarly shaped components must be painted off the vehicle while maintaining safe handling and controlled positioning.
Once you have tried it and experienced its benefits you'll never want to be without it.
Parts Processed: Motorcycle Rims, Fenders and Petrol / Gas Tanks
Double Snap-Grip Module
Double Snap Grip: Quick Fit Check
Best suited for
- Holding multiple small parts at once
- Increasing stand capacity
- Processing parts in batches
In daily use
- Provides two mounting points
- Allows painting multiple parts simultaneously
- Reduces setup time
- Improves workflow efficiency
Overview
When several small components must be painted together, technicians often lack enough secure mounting points. This causes repeated setup and handling.
Dual Mounting
The Double SnapGrip attaches to Flexible stands and provides two independent holding positions, allowing multiple parts to be mounted and painted during the same cycle.
Typical Use
Used when several small components must be processed at once without placing them on work surfaces.
Double Snap-Grip Module (Magnetic)
Double Magnetic Snap Grip: Quick Fit Check
Our Magnetic Snap Grip Tool effortlessly holds small auto body parts in need of painting, ensuring easy access and helping to produce a smooth and precise application. No more worrying about parts slipping or falling off! Featuring a magnetic base, this tool securely attaches to any metallic surface, providing a stable and reliable grip. The snap-grip head firmly holds the auto body parts in place, preventing unwanted movement and allowing you to work with ease.Best suited for
- Fast mounting of multiple small parts
- High throughput work
- Reducing repeated setup
In daily use
- Two quick mounting positions
- Allows rapid repositioning
- Prevents parts resting on benches
- Supports batch painting
Overview
Painting multiple small components typically requires repeated setup and repositioning. Improvised holding increases handling time and damage risk.
Dual Quick Mount
The Double Magnetic SnapGrip provides two rapid attachment points, allowing multiple components to be secured and processed together.
Typical Use
Used when several small parts must be mounted quickly and painted in the same cycle.
Single Snap-Grip Module (Magnetic)
Magnetic SnapGrip: Quick Fit Check
Best suited for
- Holding small components quickly
- Fast mounting without clamps or tape
- Painting small removable parts
In daily use
- Attaches instantly to the stand
- Holds small parts securely
- Allows repositioning during painting
- Prevents parts from being placed on work surfaces
Overview
Small removable vehicle components are often difficult to secure safely while painting. Improvised mounting methods restrict access and risk damaging fresh paint.
Magnetic Mounting
The Magnetic SnapGrip provides a fast attachment point on the stand, allowing small components to be secured and repositioned easily throughout the painting process.
Typical Use
The tool is used when small parts must be painted off the vehicle and need quick, repeatable mounting without complex setup.
Snap Grip Module
SnapGrip: Quick Fit Check
Best suited for
- Holding small parts during painting
- Securing lightweight components quickly
- Adding extra holding points to any Flexible stand
In daily use
- Clips parts directly onto the stand
- Allows the part to rotate with the stand
- Prevents parts being laid on benches
- Reduces handling between coats
Overview
Small automotive parts are often painted separately from the vehicle. Without proper mounting they are placed on benches, taped or held by hand.
This limits access and increases the chance of touching or damaging fresh paint.
Direct Attachment
The SnapGrip attaches directly to Flexible stands and provides a quick mounting point for small components. The part remains secure while still accessible from multiple angles.
Typical Use
The SnapGrip is used to add additional mounting capacity to a stand so multiple small parts can be processed alongside panels or bumpers.
Squeeze-Out Module
Squeeze-Out: Quick Fit Check
Best suited for
- Holding hollow components from the inside
- Painting mirror housings and similar parts
- Parts that cannot be clamped externally
In daily use
- Expands inside the part
- Holds without touching the exterior surface
- Allows full paint access
- Prevents handling damage
Overview
Some components cannot be safely clamped from the outside because the painted surface would be damaged or inaccessible.
Internal Holding
The Squeeze-Out expands outward inside the component. Instead of clamping the exterior, it holds the part from the inside walls, leaving the exterior completely accessible for painting.
Typical Use
Used when parts such as mirror housings or hollow components must be painted without external contact.
Wheel Rim Holder Module
Wheel Rim Holder: Quick Fit Check
Best suited for
- Painting wheel rims off the vehicle
- Accessing both sides of the rim
- Secure rim mounting
In daily use
- Mounts the rim from the center
- Allows full access to outer surfaces
- Rotates with the stand
- Prevents laying rims on surfaces
Overview
Wheel rims are difficult to paint when resting on benches or hung on improvised supports. Access to all sides is limited and handling damage is common.
Workflow Positioning
Within the Flexible Workflow System, the wheel rim holder secures rims from the centre hub so technicians can access the full outer surface during refinishing work. This stabilises the wheel while allowing unobstructed access.
Center Mounting
The Wheel Rim Holder secures the rim through the center opening. The outer painted surfaces remain fully accessible while the rim can be rotated and repositioned.
Typical Use
Used whenever rims must be painted off the vehicle with full access and controlled handling.
Small Parts Modules
Processing small automotive parts such as mirrors, trims, mouldings, caps and motorcycle components is a routine part of collision repair, but securing them safely during preparation, painting and curing can be difficult and time-consuming.
Flexible small parts attachments allow technicians to secure these components quickly on any Flexible stand. Instead of taping parts to benches, hanging them on wire, or balancing them in improvised setups, these tools provide fast, stable mounting that keeps parts protected while they move through the paint process.
Because the attachments are interchangeable across the Flexible stand system, technicians can configure the workstation depending on the part being processed. This allows mirrors, trims, spoilers, motorcycle parts and other small components to be positioned securely while still giving the painter full access for sanding, spraying and curing.
For shops processing multiple small parts each day, the Small Parts Tree provides a compact workstation capable of holding many parts in a footprint of roughly one square foot, helping increase booth efficiency while reducing clutter on the workshop floor.